3Com 3CRWX120695A, 3CRWX440095A manual Describes the fields in the dir output, Output for backup

clear boot config 471

Examples — The following command creates an archive of the system-critical files and copies the archive directly to a TFTP server. The filename in this example includes a TFTP server IP address, so the archive is not stored locally on the switch.

WX1200# backup system tftp:/10.10.20.9/sysa_bak critical

success: sent 28263 bytes in 0.324 seconds [ 87231 bytes/sec]

Table 92 describes the fields in the dir output.

Table 91 Output for backup

Field Description

[tftp:/ip Name of the archive file to create. You can store the file locally in the -addr/]filswitch’s nonvolatile storage or on a TFTP server.

ename

all	Backs up system files and all the files in the user files area.
	The user files area contains the set of files listed in the file section of dir
	command output.
critical	Backs up system files only, including the configuration file used when
	booting, and certificate files. The size of an archive created by this option
	is generally 1MB or less.

See also:

„dir on page 475

„restore on page 486

clear boot config Resets to the factory default the configuration that MSS loads during a reboot.

Syntax — clear boot config

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.