3Com 3CRWX120695A, 3CRWX440095A Mkdir, Following command loads configuration file testconfig1

mkdir 483

Usage — This command completely replaces the running configuration with the configuration in the file.

Examples — The following command reloads the configuration from the most recently loaded configuration file:

WX4400# load config

Reloading configuration may result in lost of connectivity, do you wish to continue? (y/n) [n]y

success: Configuration reloaded

The following command loads configuration file testconfig1:

WX4400# load config testconfig1

Reloading configuration may result in lost of connectivity, do you wish to continue? (y/n) [n]y

success: Configuration reloaded

See Also

„display boot on page 477

„display config on page 478

„save config on page 487

mkdir Creates a new subdirectory in nonvolatile storage.

Syntax — mkdir [subdirname]

„subdirname — Subdirectory name. Specify between 1 and 32 alphanumeric characters, with no spaces.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following commands create a subdirectory called corp2 and display the root directory to verify the result:

WX4400# mkdir corp2 success: change accepted. WX4400# dir

===============================================================================

file: