3Com 3CRWX120695A manual Ignore list, „ clear rfdetect ignore on, During RF detection scans

	display rfdetect ignore 461
display rfdetect	Displays the BSSIDs of third-party devices that MSS ignores during RF
ignore	scans. MSS does not generate log messages or traps for the devices in the
	ignore list.
	Syntax — display rfdetect ignore
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following example displays the list of ignored devices:
	WX4400# display rfdetect ignore
	Total number of entries: 2
	Ignore MAC
	-----------------
	aa:bb:cc:11:22:33
	aa:bb:cc:44:55:66
	See Also
	„ clear rfdetect ignore on page 457
	„ set rfdetect ignore on page 467
display rfdetect	Displays the rogues detected by all WX switches in the Mobility Domain
mobility-domain	during RF detection scans.
	Syntax — display rfdetect mobility-domain
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command is valid only on the seed switch of the Mobility
	Domain. To display rogue information for an individual switch, use the
	display rfdetect data command on that switch.
	Only rogues are listed. To display all devices detected, including 3Com
	radios, use the display rfdetect data command.