set dot1x max-req 433

 

success: dot1x key transmission enabled.

 

See Also

 

„ display dot1x on page 427

 

 

set dot1x max-req

Sets the maximum number of times the WX retransmits an EAP request

 

to a supplicant (client) before ending the authentication session.

 

Syntax set dot1x max-reqnumber-of-retransmissions

 

„ number-of-retransmissions— Specify a value between 0 and 10.

 

Defaults — The default number of EAP retransmissions is 2.

 

Access — Enabled.

 

History —Introduced in MSS Version 3.0.

 

Usage — To support SSIDs that have both 802.1X and static WEP clients,

 

MSS sends a maximum of two ID requests, even if this parameter is set to

 

a higher value. Setting the parameter to a higher value does affect all

 

other types of EAP messages.

 

Examples — Type the following command to set the maximum number

 

of EAP request retransmissions to three attempts:

 

WX4400# set dot1x max-req 3

 

success: dot1x max request set to 3.

 

See Also

 

„ clear dot1x max-reqon page 423

 

„ display dot1x on page 427

 

 

set dot1x

Determines the 802.1X authentication behavior on individual wired

port-control

authentication ports or groups of ports.

 

Syntax set dot1x port-control

 

{forceauth forceunauth auto} port-list

 

„ forceauth — Forces the specified wired authentication port(s) to

 

unconditionally authorize all 802.1X authentication attempts, with an

 

EAP success message.

Page 433
Image 433
3Com 3CRWX120695A, 3CRWX440095A manual Set dot1x max-req, „ clear dot1x max-reqon