3Com 3CRWX120695A, 3CRWX440095A manual Wep-rekey-period

	set dot1x wep-rekey 439
set dot1x	Enables or disables Wired Equivalency Privacy (WEP) rekeying for
wep-rekey	broadcast and multicast encryption keys.
	Syntax — set dot1X wep-rekey {enable disable}
	„ enable — Causes the broadcast and multicast keys for WEP to be
	rotated at an interval set by the set dot1x wep-rekey-period for
	each radio, associated VLAN, and encryption type. The WX generates
	the new broadcast and multicast keys and pushes the keys to the
	clients via EAPoL key messages.
	„ disable — WEP broadcast and multicast keys are never rotated.
	Defaults — WEP key rotation is enabled, by default.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — Reauthentication is not required for WEP key rotation to take
	place. Broadcast and multicast keys are always rotated at the same time,
	so all members of a given radio, VLAN, or encryption type receive the
	new keys at the same time.
	Examples — Type the following command to disable WEP key rotation:
	WX4400# set dot1x wep-rekey disable
	success: wep rekeying disabled
	See Also
	„ display dot1x on page 427
	„ set dot1x wep-rekey-periodon page 439
set dot1x	Sets the interval for rotating the WEP broadcast and multicast keys.
wep-rekey-period	Syntax — set dot1x wep-rekey-period seconds
	„ seconds — Specify a value between 30 and 1,641,600 (19 days).
	Defaults — The default is 1800 seconds (30 minutes).
	Access — Enabled.