set igmp mrsol 361

„enable — Adds the port to the list of static multicast router ports.

„disable — Removes the port from the list of static multicast router ports.

Defaults — By default, no ports are static multicast router ports.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — You cannot add MAP access ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multicast traffic.

Examples — The following command adds port 6 as a static multicast router port:

WX1200# set igmp mrouter port 6 enable success: change accepted.

The following command removes port 6 from the static multicast router port list:

WX1200# set igmp mrouter port 6 disable success: change accepted.

See Also

„display igmp statistics on page 356

set igmp mrsol

Enables or disables multicast router solicitation by a WX.

Syntax — set igmp mrsol {enable disable} [vlan vlan-id]

„enable — Enables multicast router solicitation.

„disable — Disables multicast router solicitation.

„vlan vlan-id— VLAN name or number. If you do not specify a VLAN, multicast router solicitation is disabled or enabled on all VLANs.

Defaults — Multicast router solicitation is disabled on all VLANs by default.

Access — Enabled.

Page 361
Image 361
3Com 3CRWX120695A Set igmp mrsol, See Also „ display igmp statistics on, Syntax set igmp mrsol enable disable vlan vlan-id