set ntp update-interval 149

 

History —Introduced in MSS Version 3.0.

 

Usage — You can configure up to three NTP servers. MSS queries all the

 

servers and selects the best response based on the method described in

 

RFC 1305, Network Time Protocol (Version 3) Specification,

 

Implementation and Analysis.

 

To use NTP, you also must enable the NTP client with the set ntp

 

command.

 

Examples — The following command configures a WX switch to use

 

NTP server 192.168.1.5:

 

WX4400# set ntp server 192.168.1.5

 

See Also

 

„ clear ntp server on page 113

 

„ clear ntp update-intervalon page 113

 

„ display ntp on page 126

 

„ set ntp on page 148

 

„ set ntp update-intervalon page 149

 

 

set ntp

Changes how often MSS sends queries to the NTP servers for updates.

update-interval

Syntax set ntp update-interval seconds

 

 

„ seconds — Number of seconds between queries. You can specify

 

from 16 through 1,024 seconds.

 

Defaults — The default NTP update interval is 64 seconds.

 

Access — Enabled.

 

History —Introduced in MSS Version 3.0.

 

Examples — The following command changes the NTP update interval

 

to 128 seconds:

WX4400# set ntp update-interval 128 success: change accepted.

Page 149
Image 149
3Com 3CRWX120695A manual RFC 1305, Network Time Protocol Version 3 Specification, Implementation and Analysis, NTP server