3Com 3CRWX440095A manual Vlan Globs, Matching Order for Globs, „ a single port number. For example

26CHAPTER 1: USING THE COMMAND-LINE INTERFACE

VLAN Globs

A VLAN glob is a method for matching one of a set of local rules on an wireless LAN switch, known as the location policy, to one or more users. MSS compares the VLAN glob, which can optionally contain wildcard characters, against the VLAN-Name attribute returned by AAA, to determine whether to apply the rule.

To match all VLANs, use the double-asterisk (**) wildcard characters with no delimiters. To match any number of characters up to, but not including, a delimiter character in the glob, use the single-asterisk (*) wildcard. Valid VLAN glob delimiter characters are the at (@) sign and the period (.).

For example, the VLAN glob bldg4.* matches bldg4.security and bldg4.hr and all other VLAN names with bldg4. at the beginning.

Matching Order for Globs

In general, the order in which you enter AAA commands determines the order in which MSS matches the user, MAC address, or VLAN to a glob. To verify the order, view the output of the display aaa or display config command. MSS checks globs that appear higher in the list before items lower in the list and uses the first successful match.

Port Lists The physical Ethernet ports on a WX switch can be set for connection to MAP access points, authenticated wired users, or the network backbone. You can include a single port or multiple ports in one MSS CLI command by using the appropriate list format.

The ports on a WX switch are numbered 1 through 4 (for the 3Com Wireless LAN Controller WX4400) and 1 through 8 (for the 3Com Wireless Lan Switch WX1200). No port 0 exists on the WX switch. You can include a single port or multiple ports in a command that includes port port-list.Use one of the following formats for port-list:

„A single port number. For example:

WX1200# set port enable 6

„A comma-separated list of port numbers, with no spaces. For example:

WX1200# display port poe 1,2,4