3Com 3CRWX120695A manual About user jose’s authentication, Authorization for MAC address

set trace authorization 495

	Examples — The following command starts a trace for information
	about user jose’s authentication:
	WX4400# set trace authentication user jose
	success: change accepted.
	See Also
	„ clear trace on page 492
	„ display trace on page 493
set trace	Traces authorization information.
authorization	Syntax — set trace authorization [mac-addr mac-address]
	[port port-num] [user username] [level level]
	„ mac-addrmac-address— Traces a MAC address. Specify a MAC
	address, using colons to separate the octets (for example,
	00:11:22:aa:bb:cc).
	„ port port-num— Traces on a WX a port number.
	„ user username — Traces a user. Specify a username of up to
	80 alphanumeric characters with no spaces.
	„ level level — Determines the quantity of information included in
	the output. You can set the level with an integer from 1 to 10, where
	level 10 provides the most information. Levels 1 through 5 provide
	user-readable information. If you do not specify a level, level 5 is the
	default.
	Defaults — The default trace level is 5.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — The following command starts a trace for information for
	authorization for MAC address 00:01:02:03:04:05:

WX4400# set trace authorization mac-addr 00:01:02:03:04:05 success: change accepted.