3Com 3CRWX120695A, 3CRWX440095A manual Set mac-user, Tempvendora into Vlan kiosk1

set mac-user 207

	The following command authorizes users entering the network on WX
	ports 1 and 2 to use the floor2 VLAN, overriding any settings from AAA:
	WX4400# set location policy permit vlan floor2 if port 1-2
	The following command places all users who are authorized for SSID
	tempvendor_a into VLAN kiosk_1:
	WX1200# set location policy permit vlan kiosk_1 iff ssid eq
	tempvendor_a
	success: change accepted
	See Also
	„ clear location policy on page 171
	„ display location policy on page 185
set mac-user	Configures a user profile in the local database on the WX switch for a
	user who can be authenticated by a MAC address, and optionally adds
	the user to a MAC user group.
	(To configure a MAC user profile in RADIUS, see the documentation for
	your RADIUS server.)
	Syntax — set mac-user mac-addr[group group-name]
	„ mac-addr— MAC address of the user, in hexadecimal numbers
	separated by colons (:). You can omit leading zeros.
	„ group-name— Name of an existing MAC user group.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — MSS does not require MAC users to belong to user groups.
	Users authenticated by MAC address can be authenticated only for
	network access through the WX switch. MSS does not support passwords
	for MAC users.