3Com 3CRWX120695A, 3CRWX440095A manual Decide whether to change channel or power settings

		display auto-tune attributes 249
	Table 49 Output for display ap status (continued)
	Field	Description
	CPU info	Specifications and identification of the CPU.
		For MAP models MP-352, MP-341, and MP-52, the ID
		portion of this field is not applicable.
	Uptime	Amount of time since the MAP last rebooted using this link.
		Note: This field is displayed only when this link is the MAP
		access point’s primary link.
	Radio 1 type	802.11 type and configuration state of the radio.
	Radio 2 type	„ The configure succeed state indicates that the MAP has
		received configuration parameters for the radio and the
		radio is ready to accept client connections.
		„ For 802.11b/g radios, 802.11b protect indicates that the
		radio is in 802.11b protection mode and is therefore
		operating only at 802.11b rates.
		„ Sweep Mode indicates that a disabled radio is
		nonetheless participating in rogue detection scans. Even
		though this message appears only for disabled radios, all
		radios, enabled or disabled, participate in rogue
		detection.
		„ Countermeasures Enabled indicates that the radio is
		sending countermeasures packets to combat a rogue.
	operational channel	The channel on which the radio is currently operating.
	operational power	The power level at which the radio is currently operating.
	base mac	Base MAC address of the radio.
	bssid, ssid	SSIDs configured on the radio and their BSSIDs.
display auto-tune	Displays the current values of the RF attributes RF Auto-Tuning uses to
attributes	decide whether to change channel or power settings.

Syntax — display auto-tune attributes [ap map-num[radio {1 2 all}]]

Syntax — display auto-tune attributes [dap dap-num[radio {1 2 all}]]

„map-num— MAP port connected to the MAP access point for which to display RF attributes.

„dap-num— Number of a Distributed MAP for which to display RF attributes.