3Com 3CRWX440095A, 3CRWX120695A manual Enable, Quit

34CHAPTER 2: ACCESS COMMANDS

	See Also
	„ enable on page 34
enable	Places the CLI session in enabled mode, which provides access to all
	commands required for configuring and monitoring the system.
	Syntax — enable
	Access — All.
	History — Introduced in MSS Version 3.0.
	Usage — MSS displays a password prompt to challenge you with the
	enable password. To enable a session, your or another administrator
	must have configured the enable password to this WX switch with the
	set enablepass command.
	Examples — The following command plus the enable password provides
	enabled access to the CLI for the current sessions:
	WX1200> enable
	Enter password: password
	WX1200#
	See Also
	„ set enablepass on page 35
	„ “set confirm” on page 47
quit	Exit from the CLI session.
	Syntax — quit
	Defaults — None.
	Access — All.
	History — Introduced in MSS Version 3.0.
	Examples — To end the administrator’s session, type the following
	command:

WX1200> quit