3Com 3CRWX440095A, 3CRWX120695A manual Clear ip telnet, „ display ip route on, „ set ip route on

112CHAPTER 6: IP SERVICES COMMANDS

„ip-addr/mask-length— IP address and subnet mask length in CIDR format (for example, 10.10.10.10/24).

„gateway — IP address, DNS hostname, or alias of the next-hop router.

	Defaults — None.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — The following command removes the route to destination
	10.10.10.68/24 through gateway router 10.10.10.1:
	WX1200# clear ip route 10.10.10.68/24 10.10.10.1
	success: change accepted.
	See Also
	„ display ip route on page 123
	„ set ip route on page 140
clear ip telnet	Resets the Telnet server’s TCP port number to its default value. A WX
	switch listens for Telnet management traffic on the Telnet server port.
	Syntax — clear ip telnet
	Defaults — The default Telnet port number is 23.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — The following command resets the TCP port number for
	Telnet management traffic to its default:
	WX4400# clear ip telnet
	success: change accepted.

See Also

„display ip https on page 121

„display ip telnet on page 125

„set ip https server on page 140