3Com 3CRWX120695A, 3CRWX440095A Performance, On the switch, Commands on, 802.1X Commands by Usage

15	802.1X MANAGEMENT
	COMMANDS

	Use 802. IEEE X management commands to modify the default settings
	for IEEE 802.1X sessions on an WX switch. For best results, change the
	settings only if you are aware of a problem with the WX switch’s 802.1X
	performance.
	CAUTION: 802.1X parameter settings are global for all SSIDs configured
	on the switch.
Commands by	This chapter presents 802.1X commands alphabetically. Use Table 77 to
Usage	locate commands in this chapter based on their use. For information
	about configuring 802.1X commands for user authentication, see “AAA
	Commands” on page 163.
	Table 77 802.1X Commands by Usage

Type	Command
Wired Authentication Port	set dot1x port-controlon page 433
Control
	clear dot1x port-controlon page 423
	set dot1x authcontrol on page 430
Keys	set dot1x key-txon page 432
	set dot1x tx-periodon page 438
	clear dot1x tx-periodon page 427
	set dot1x wep-rekeyon page 439
	set dot1x wep-rekey-periodon page 439
Bonded Authentication	clear dot1x bonded-periodon page 422
	set dot1x bonded-periodon page 431
Reauthentication	set dot1x reauth on page 435
	set dot1x reauth-maxon page 436