3. Control panel and operations
3. Control panel and operations
Control panel and indicators
Standard Panel
L C D
RESET
TOF SET
PARK
BIN
EXIT
SETUP
|
|
|
| POWER |
|
|
|
| ON LINE |
QUALITY | M.LF | LF | FF | P.OUT |
ENTER |
|
|
|
|
ALT | M.RLF | RLF | TEAR OFF | ON LINE |
Alternate up-side down reverse panel
RESET | L C D |
|
SET TOF 
PARK
BIN
EXIT
SETUP
LF.M | LF | FF | POWER |
|
|
| |
|
|
| LINE ON |
QUALITY |
|
| OUT.P |
RLF.M | RLF | OFF TEAR LINE ON | |
ENTER |
|
|
|
ALT |
|
|
|
Note: The alternate reverse panel installation instruction is described in Appendix D.
❏Indicators
•Display window Liquid Crystal Display (LCD)
Displays status and errors during operation and menus in the setup options. The followings are some examples of the display messages.
P.OUT FANFOLD
COVER OPEN
Status message
This indicates that the printer is in offline and paper out status.
Warning message
This indicates that the printer cover is open. Close the cover to resume the operation .
If the printer is in the offline mode, the following appears on the display.
FANFOLD 11
15
Status message for fanfold continuous paper
This column indicates the page length; and the paper widlh.
This indicates the type of paper selected is fanfold continuous paper.
MANUAL: A4 P
Status message for single sheets paper
This indicates a paper size; B5 through A3 depending on the designated paper size (default A4) selected in the setup options. This indicates the type of paper selected is single sheet paper. MANUAL, BIN 1, BIN 2, BIN 1+2
16
