Seiko Group BP-9000 owner manual Ascii DC4

9. Bar code and enlarged character

(5) HRI font: DC4 DC4 F

Format:	ASCII	DC4	DC4	F	n
	Hex	14	14	46	n
	Decimal	20	20	70	n

Function: Selects the font of printing the HRI. n = 0: Currently selected font

1:OCR-A

2:OCR-B

This setting is not valid for Postnet or Element.

(6) Check character: DC4 DC4 C
Format:	ASCII	DC4	DC4	C	n
	Hex	14	14	43	n
	Decimal	20	20	67	n

Function: Specifies whether to add a check character automatically.

n = 0: No check character is added. (If a check character is needed, the user must send bar code data.)

1:A check character is added. (The check character is not printed in the HRI when Code 93 or Code 128 is selected.)

If the Codabar or Element is selected, no check character is added regardless of this setting.

The following shows the methods of determining the check characters and bar code types. (For details, see “Calculating the check character” below.)

Modulus	10	Industrial 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, EAN, UPC,
		Postnet
Modulus	11	Code	11 (Dual Check character)
Modulus	16	Codabar
Modulus	43	Code	39
Modulus	47	Code	93 (Dual Check character)
Modulus	103	Code	128
(7) Beginning of the bar code data sequence: ESC SI
Format:		ASCII	ESC	SI
		Hex	1B	0F
	Decimal		27	15
Function:	Indicates the beginning of a bar code data sequence.
	Data between this and the end command of the bar code data sequence
	is regarded as bar code data.

This command is valid only when #27 BARCODE/LABEL MODE is set to MODE 2 in the EXTENDED SETUP MODE.

72