3. Control panel and operations
•M.LF/M.RLF
M.LF
M.RLF
•TEAR OFF
TEAR OFF
(Micro line feed/micro reverse line feed)
When the M.LF/M.RLF key is pressed, the paper is fed 1/360 inch forward or backward, respectively. This key is used to set the paper position.
To set the TOF SET
[Used only for fanfold paper]
Pressing this key advances the perforation of the form to the paper cutter so that the leading form can be torn off from the rest.
|
|
| If this key is pressed after the form is torn off, the paper is fed backwards |
|
|
| and the mode is returned to offline. If the ON LINE key is pressed instead |
|
|
| of the TEAR OFF key, the paper is fed backwards and the mode is changed |
|
|
| to the online mode. |
• PARK |
| (Paper parking) | |
|
|
|
|
|
|
| Pressing this key unloads the paper if the paper is already loaded and loads |
|
|
| the paper when the paper is not already loaded. |
|
|
|
|
| TOF SET |
|
|
PARK
•BIN
BIN
EXIT
SETUP
+
ENTER
ALT
Fanfold continuous paper (paper select lever in fanfold setting)
The paper is moved to the park station in the back of the printer by pressing this key. When pressing this key with the paper in the park position, the paper will be loaded to the print station between 0 and 8 inches from the top edge of the paper, depending on the loading position (TOF Adjust) selected in the basic setup options on page 31.
Single sheet paper (paper select lever in single sheet setting)
The paper in the print station will be ejected. When paper is in the paper rack, the paper is moved to the print station by pressing this key.
(ALT+SETUP keys)
This key is for selecting the active paper tray of the cut sheet feeder or the paper feed type:MANUAL, BIN1, BIN2 or BIN1+2. BIN1, BIN2, BIN1+2 appears only when the cut sheet feeder (CSF) option is set.
Note
The paper select lever must be switched to the single sheet setting.
18
