Tone squelch frequency/DTCS code setting | Icom IC-R5 specification

TONE SQUELCH AND POCKET BEEP 8

■Tone squelch frequency/DTCS code setting

88.5Hz and 023 is set as the default for the tone squelch fre- quency and the DTCS code, respectively. The frequency and code can be selected as desired.

qPush [TS•SET] for 1 sec. to enter set mode. wRotate [DIAL] to select “EXPAND” item.

eWhile pushing [FUNC], rotate [DIAL] to turn the expanded set mode ON.

rRotate [DIAL] to select “TONE” item when selecting the tone squelch frequency; select “CODE” item when select- ing the DTCS code.

Tone squelch frequency selection

After 1 sec.

DTCS code selection

After 1 sec.

tWhile pushing [FUNC], rotate [DIAL] to select the desired subaudible tone frequency or DTCS code.

• See the tables at right.

yPush [TS•SET] to exit set mode.

•Available tone frequency list

67.0	79.7	94.8	110.9	131.8	156.7	171.3	186.2	203.5	229.1
69.3	82.5	97.4	114.8	136.5	159.8	173.8	189.9	206.5	233.6
71.9	85.4	100.0	118.8	141.3	162.2	177.3	192.8	210.7	241.8
74.4	88.5	103.5	123.0	146.2	165.5	179.9	196.6	218.1	250.3
77.0	91.5	107.2	127.3	151.4	167.9	183.5	199.5	225.7	254.1

NOTE: The receiver has 50 tone frequencies and conse-
quently their spacing is narrow compared to units having
38 tones. Therefore, some tone frequencies may receive
interference from adjacent tone frequencies.	8
	8

•Available DTCS code list

023	054	125	165	245	274	356	445	506	627	732
025	065	131	172	246	306	364	446	516	631	734
026	071	132	174	251	311	365	452	523	632	743
031	072	134	205	252	315	371	454	526	654	754
032	073	143	212	255	325	411	455	532	662
036	074	145	223	261	331	412	462	546	664
043	114	152	225	263	332	413	464	565	703
047	115	155	226	265	343	423	465	606	712
051	116	156	243	266	346	431	466	612	723
053	122	162	244	271	351	432	503	624	731

36

Image 47

Icom IC-R5 Tone squelch frequency/DTCS code setting, Available tone frequency list, Available Dtcs code list

Contents

IR5 Explicit Definitions Precaution Iii Supplied Accessories Table of Contents Belt clip Battery installationQuick Reference Guide Preparation Charging conﬁrmation is displayed as below Install the Ni-Cd batteriesRotate Dial to select Y then push Band Basic operation About default settingYour ﬁrst scanning Experience Selecting a memory Channel Receive mode selectionSetting frequency Memory programming Selecting a scan edge channel B Programmed scan operationProgramming scan edges Selecting a scan edge channel a Starting scan Starting scan Select VFO modeCancelling scan Selecting a scanning type Front, top and side panels Panel Description UCONTROL Dial Dial Push for 1 sec. to turn the receiver power on and OFF TTONE Indicators WLOCK Indicator pERECEIVE Mode Indicator p RDUPLEX Indicators p 2VOLUME Exchange Indicator p Priority Watch Indicator p1SIGNAL Strength Indicator p Charging caution Battery ChargingBattery installation Battery caution Charging periods Approx hours Battery chargingCharging connections Charging description Operating band selection Frequency and Channel SettingVFO and memory channels Available frequency bands Frequency and Channel Setting Rotate Dial to select the desired frequency band Setting a frequencySetting a tuning step Tuning step selection Rotate Dial to select the desired memory channel Push V/MS.MW~ to select the memory modeSelecting a memory channel Lock function Receiving Setting audio volumeWhen a signal is received Basic Operation Receive mode selection Squelch level setting Push and hold SQL to monitor the operating frequency Monitor functionAttenuator function Rotate Dial to select DUP SettingDuplex operation Dial select step Setting dial select stepPush Tsset momentarily to exit set mode General description Memory Channels Push V/MS.MW~ momentarily to set the channel into the bank Memory bank settingRotate Dial to select the desired bank channel number To return to regular memory condition, rotate Dial while Memory bank selectionPush V/MS.MW~ to select memory mode, if desired Rotate Dial to select the bank channel Available characters Programming memory/bank nameRotate Dial to move the cursor to left or right Selecting bank channel indication Selecting display type Copying memory contents Essary Push V/MS.MW~ for 1 sec. to clear the contentsMemory clearing While pushing FUNC, push V/MS.MW~ for 1 sec Transferring memory contents Erasing/transferring bank contents FREQUENCY/MEMORY Skip Function p Scan OperationScan types Full Scan p To start the scan, push Modescan Select VFO mode with V/MS.MW~Full/band/programmed scan Example Programming 145.300 MHz into scan edges 03A Scan edges programming Memory/bank/all bank scan Select memory mode with V/MS.MW~ Clearing the stored frequencies Auto memory write scanDuring auto-memory write scanning Re-calling the stored frequencies Nel Skip channel/frequency setting Scan resume condition Scan pause timerScan resume timer Watch starts Priority WatchPriority watch types About priority beep function Select memory mode, or the desired bank group then Push Tsset to exit set mode and start the watchPush Tsset to cancel the watch Priority watch operation 0Push Tsset to cancel the watch and scan VFO scan watch qSelect memory modeWhen scanning memory/bank channels Step y Tone Squelch and Pocket BeepTone/DTCS squelch operation OPush Func to stop the beeps and blinking manually Available tone frequency list Tone squelch frequency/DTCS code settingAvailable Dtcs code list Dtcs polarity setting While pushing FUNC, push Modescan to start the tone scan Tone scan General SET ModeSet mode entering and operation Expanded set mode ON/OFF Expanded set mode items Set mode itemsGeneral set mode items Beep output level Dial select stepPriority watch Key-touch beep MHz differ according to version, re Power saveAntenna selection Dial speed acceleration Monitor switch actionNo accessible switch is available, except Key lock effect Scan stop beep Auto power OFFScan pause timer Scan resume timer Tone squelch Offset frequencyDuplex direction Available Dtcs code DTone frequency Ddtcs codeDtcs polarity Available subaudible tone frequencies Turns weather alert function on and OFF LCD contrastWeather alert function Selecting antenna Other FunctionsAntenna selection Weather channel selection Dial function assignmentWeather channel operation Turn the weather alert function OFF in set mode Push SQL on the master receiver Cloning between receivers Cloning error Auto power-off functionCloning using a personal computer Partial reset Dccir channels Frequency TableTV channels DU.S.A. channels Channels DChina channelsDNew Zealand FOT channels Indonesian channelsDItalian channels Taiwan channels Weather channelsunit MHz VHF marine channels HF CB Citizens Band channels Other communications in the USAMurs channels DCable TV IRC Wireless MicrophonesGeneral aviation frequencies PMR446 channels unit MHz LPD Low Power Device channels Unit MHzOther communications- other countries UHF C.R.S Citizen Radio Service channels Troubleshooting Maintenance CP-18A/E fuse replacement Dgeneral Specifications Options Options Pocket Guide Memory channel programming We Icom Inc. Japan Declaration Conformity Kamiminami, Hirano-ku, Osaka 547-0003 Japan