Icom IC-R5 Dial select step, Setting dial select step, Push Tsset momentarily to exit set mode

4 BASIC OPERATION

■ Dial select step [

This receiver has a 1 MHz tuning step for quick frequency setting. This dial select step can be set to 100 kHz, 1 MHz or 10 MHz steps, as desired.

DSetting dial select step

qSelect VFO mode with [V/M•S.MW•~]. wPush [TS•SET] for 1 sec. to enter set mode. eRotate [DIAL] to select “D SEL.”

•“D SEL” disappears after 1 sec. and “1M” (default) and “DS” ap- pear.

rWhile pushing [FUNC], rotate [DIAL] to select the desired dial select step.

• 100 kHz, 1 MHz and 10 MHz can be selected.

tPush [TS•SET] momentarily to exit set mode.

[DIAL] 1 MHz step

[FUNC]

[TS•SET]

10 MHz step

100 kHz step

15