OnCell G2150I AT Command Set

General Commands

to GSM 11.11 or 3GPP TS 51.011). After the READ BINARY or READ RECORD command, the requested data will be returned.

<error>: integer type

3:Wrong format or parameters of the command

13:SIM no response

Mobile Equipment Control Mode: +CMEC

Description: This command selects the equipment that operates the ME keypad, writes to MEi display and sets ME indicators. If operation mode is not allowed by the ME, +CME ERROR: <err> is returned

Command syntax: AT+CMEC=[<keyp>[,<disp>[,<ind>]]]

Response syntax: +CMEC: <keyp>,<disp>,<ind>

Command

Possible responses

AT+CMEC=[<keyp>[,<disp>[,<ind>]]]

+CME ERROR: <err>

AT+CMEC=[<keyp>[,<disp>[,<ind>]]]

OK

AT+CMEC?

+CMEC: 2,0,0

 

OK

AT+CMEC=?

+CMEC: (2),(0),(0)

 

OK

 

Note: no change allowed

Defined values: <keyp>: Defined values:

0:ME can be operated only through its keypad (execute command of +CKPD cannot be used)

1:ME can be operated only from TE (with command +CKPD)

2:ME can be operated from both ME keypad and TE

<disp>: 0: only ME can write to its display (command +CDIS can only be used to read the display)

1:only TE can write to ME display (with command +CDIS)

2:ME display can be written by both ME and TE

<ind>: 0: only ME can set the status of its indicators (command +CIND can only be used to read the indicators)

1:only TE can set the status of ME indicators (with command +CIND)

2:ME indicators can be set by both ME and TE

Indicator Control: +CIND

Description: This command is used to read or set the values of ME indicators. If ME does not allow setting of indicators or ME is not currently reachable, an error code is returned.

Command syntax:

Command Syntax: AT+CIND=[<ind>[,<ind>[,…]]]

Response syntax: +CIND: <ind>[,<ind>[,…]] or

+CIND: (<descr>,(list of supported <ind>s)) [,(<descr>,(list of supported <ind>s)) [,…]]

Command

 

Possible responses

AT+CIND=[<ind>[,<ind>[,…]]]

 

+CME ERROR: <err>

 

 

Note: ME not reachable

 

3-11

Page 23
Image 23
Moxa Technologies G2150I Mobile Equipment Control Mode +CMEC, Indicator Control +CIND, Defined values keyp Defined values