Moxa Technologies G2150I manual Cellular Result Codes +CRC, DTE-DCE Local Rate Reporting +ILRR

OnCell G2150I AT Command Set			Data Commands
	+CR: ASYNC		For asynchronous transparent
	+CR: REL ASYNC		For asynchronous non-transparent
	Command syntax: AT+CR=<mode>
	Command	Possible responses
	AT+CR=0	OK
	Note: Extended reports disabled	Note: Command valid
	AT+CR=1	OK
	Note: Extended reports enabled	Note: Command valid
	AT+CR?	+CR: 1
		OK
	AT+CR=?	+CR: (0,1) OK

Defined values: <mode>:

0:disable extended reports

1:enable extended reports

Cellular Result Codes: +CRC

Description: This command allows more detailed ring information for an incoming call (voice or data). Instead of the string “RING”, an extended string is used to indicate which type of call is ringing (e.g. +CRING: VOICE). These extended indications are:

+CRING ASYNC	for asynchronous transparent
+CRING: REL ASYNC	for asynchronous non-transparent
+CRING: VOICE	for normal speech.
+CRING: FAX	for fax calls

Command syntax: AT+CRC=<mode>

Command	Possible responses
AT+CRC=0	OK
Note: Extended reports disabled	Note: Command valid
AT+CRC=1	OK
Note: Extended reports enabled	Note: Command valid
AT+CRC?	+CRC: 1
	OK
AT+CRC=?	+CRC: (0,1)
	OK

Defined values: <mode>:

0:disable extended reports

1:enable extended reports

DTE-DCE Local Rate Reporting: +ILRR

Description: This parameter controls whether the extended-format “+ILRR: <rate>“ information text is transmitted from the DCE to the DTE or not. The <rate> value reported represents the current (negotiated or renegotiated) DTE-DCE speed rate. If enabled, the intermediate result code is transmitted in an incoming or outgoing data call, after any data compression report, and before any final result code (CONNECT)

8-4