Moxa Technologies G2150I manual Send Message +CMGS, Then have their status changed to REC Read

OnCell G2150I AT Command Set				Short Message Commands
	Command		Possible responses
	AT+CMGL=“REC UNREAD”		+CMGL: 1,”REC UNREAD”,”0146290800”,,
	Note: List unread messages in text mode		<CR><LF> I will be late
			+CMGL: 3,”REC UNREAD”, “46290800”,,
			<CR><LF>See you tonight !
			OK
			Note: 2 messages are unread, these messages will
			then have their status changed to “REC READ”
	AT+CMGL=“REC READ”		+CMGL: 2,”REC READ”,”0146290800”,,
	Note: List read messages in text mode		<CR><LF> Keep cool
			OK
	AT+CMGL=“STO SENT”		OK
	Note: List stored and sent messages in		Note: No message found
	text mode
	AT+CMGL=1		+CMGL: 1,1,,26
	Note: List read messages in PDU mode		<CR><LF>
			07913366003000F3040B913366920547F40013
			001190412530400741AA8E5A9C5201
			OK
	Defined values: <stat> possible values (status of messages in memory):
	Text mode possible values	PDU mode possible		Status of messages in memory
		values
	“REC UNREAD”	0		received unread messages
	“REC READ”	1		received read messages
	“STO UNSENT”	2		stored unsent messages
	“STO SENT”	3		stored sent messages
	“ALL”	4		all messages

Note: For SMS Status Reports, only “ALL” / 4 and “READ” / 1 values of the <stat> parameter will list messages; other values will only return OK.

Send Message: +CMGS

Description: The <address> field is the address of the terminal to which the message is sent. To send the message, simply type <ctrl-Z> character (ASCII 26). The text can contain all existing characters except <ctrl-Z> and <ESC> (ASCII 27). This command can be aborted using the <ESC> character when entering text. In PDU mode, only hexadecimal characters are used (‘0’…’9’,’A’…’F’).

Command syntax:

in text mode: AT+CMGS=<da> [ ,<toda> ] <CR>

text is entered	<ctrl-Z / ESC >
in PDU mode: AT+CMGS=<length> <CR>
PDU is entered	<ctrl-Z / ESC >
Command		Possible responses

AT+CMGS=“+33146290800”<CR>

Please call me soon, Fred. <ctrl-Z>

Note: Send a message in text mode

7-11