OnCell G2150I AT Command Set

Introduction

Scope of the Document

This document describes the AT-command based messages exchanged between an application and the OnCell G2150I for managing GSM related events or services.

External

Application

Send AT command

Receive AT response

Serial Link

OnCell G2150I

AT

Related Documents

The interface specifications described here are based on the following recommendations:

[1]ETSI GSM 07.05: Digital cellular telecommunications system (Phase 2); Use of DTE-DCE interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)

[2]ETSI GSM 07.07: Digital cellular telecommunications system (Phase 2); AT command set for GSM Mobile Equipment (ME)

[3]ITU-T Recommendation V.25ter: Serial asynchronous automatic dialing and control

[4]ETSI GSM 03.40: Digital cellular telecommunications system (Phase 2); Technical implementation of the Short Message Service (SMS) Point-to-Point (PP)

[5]ETSI GSM 03.38: Digital cellular telecommunications system (Phase 2); Alphabets and language-specific information

[6]ETSI GSM 04.80: Digital cellular telecommunications system (Phase 2): Mobile radio interface layer 3, Supplementary service specification, Formats and coding

[7]3GPP 05.02: 3rd Generation Partnership Project; Technical Specification Group GSM/EDGE- Radio Access Network; Multiplexing and multiple access on the radio path – 3GPP TS 05.02 V6.9.2 (2001-04)

ETSI Secretariat

The following addresses may be of use in obtaining the latest GSM/GPRS recommendations:

Postal address: F-06921 Sophia Antipolis CEDEX – France

Office address: 650 Route des Lucioles – Sophia Antipolis – Valbonne – France

Web address: http://www.etsi.org/

Tel: +33 4 92 94 42 00

Fax: +33 4 93 65 47 16

1-2

Page 8
Image 8
Moxa Technologies G2150I manual Scope of the Document, Related Documents, Etsi Secretariat