Moxa Technologies G2150I Final Result Codes, +Ciev, Verbose Result Code Numeric Description Set

OnCell G2150I AT Command Set			Result Codes, Failure Causes,, and Other Tables
	+CLIP: <number>, <type>		As verbose	Incoming Call Presentation
	[,,,<alpha>]
	+CMT: <oa>…	(text	As verbose	Incoming message directly
	mode)			displayed
	or +CMT: [<alpha>,]… (PDU)
	+CMTI: <mem>,<index>		As verbose	Incoming message stored in <mem>
				(“SM”) at location <index>
	+CREG: <stat> [,<lac>,<ci>]		As verbose	Network registration indication
	+CRING: <type>		As verbose	Incoming call type (VOICE,
				FAX ...)
	+CSQ: <RxLev>,99		As verbose	Automatic RxLev indication with
				AT+CCED=1,8 command
	+CSSU: <code2>[<number>,<type>]		As verbose	Supplementary service notification
				during a call
	+STIN: <ind>		As verbose	SIM ToolKit Indication
			(specific)
	+WIND: <IndicationNb> [,<CallId>]		As verbose	Specific unsolicited indication (SIM
			(specific)	Insert/Remove, End of init,
				Reset, Alerting, Call
				creation/release)
	+WVMI: <LineId>,<Status>		As verbose	Voice Mail Indicator notification
			(specific)	(cf. +CPHS command)
	+WDCI: <LineId>,<Status>		As Verbose	Diverted call indicator
			(specific)
	RING		2	Incoming call signal from network
	+CIEV		As Verbose	Indicator event reporting
			(specific)

Final Result Codes

Verbose Result Code	Numeric (V0	Description
	set)
+CME ERROR: <err>	As verbose	Error from GSM 07.05 commands
+CMS ERROR: <err>	As verbose	Error from SMS commands (07.07)
BUSY	7	Busy signal detected
ERROR	4	Command not accepted
NO ANSWER	8	Connection completion timeout
NO CARRIER	3	Connection terminated
OK	0	Acknowledges correct execution of a
		command line
RING	2	Incoming call signal from network

A-9