Moxa Technologies G2150I manual More Messages to Send +CMMS, Defined values mode Copy mode

OnCell G2150I AT Command Set		Short Message Commands
	AT+WMCP=0	OK
	Note: Copy all the SMS from the SIM to
	the Flash
	AT+CPMS?	+CPMS: “ME”,4,99,”ME”,4,99,”SM”,4,10
	Note: Read the SMS storage	OK
		Note: 4 SMS are stored in the flash.

Defined values: <mode> Copy mode

•0: From the SIM to the Flash

•1: From the Flash to the SIM

<loc> Location of the SMS to copy (mandatory for <mode>=1). If this location is not defined, all the SMS will be copied.

Note: The SMS copied will have the first free location.

More Messages to Send: +CMMS

Description: This short message service-oriented AT command allows to keep the link opened while sending several short messages within a short delay.

Command syntax: AT+CMMS = <mode>

Command	Possible responses
AT+ CMMS=0	OK
Note: Disable feature	Note: feature is disabled
AT+ CMMS=1	OK
Note: Enable feature 1 time	Note: feature is enabled, link is open
AT+ CMMS=2	OK
Note: Enable feature	Note: feature is enabled, link is open
AT+ CMMS?	+CMMS: 2
	OK
AT+ CMMS=?	+CMMS: (0-2) OK

Defined values: <mode> 0 Disable feature

1 Keep link opened while messages are sent. If the delay between two messages exceeds 5 seconds, the link is closed and the mode is reset to 0: the feature is disabled.

2 Keep link opened while messages are sent. If the delay between two messages exceeds 5 seconds, the link is closed

Notes:

•The delay of 5 seconds complies with Rec 3GPP 27.005 §3.5.6.

•Before sending the last SMS in the link, you must use AT+CMMS=0 command. This command will indicate that the NEXT SMS will be the last one.

7-21