ADSL Router User Manual

PPP over ATM (PPPoA) Mode

 

Dynamic Public IP

 

Default Private IP

 

assigned by BRAS

 

192.168.1.1

ISP

STM-1

 

192.168.1.3

 

 

(Internet Service Provider)

Loop

 

 

 

 

 

Ethernet

BRAS

DSLAM

ADSL

Hub

 

Router

 

AAA

 

 

 

 

 

RDAIUS

 

 

192.168.1.2

Server

 

 

 

 

 

 

PPP over ATM

 

PC(S)

*BRAS: Broadband

 

 

 

 

 

Remote Access Server

PPPoA+NAT+DHCP

 

 

 

 

 

 

on Private LAN

 

 

Description:

In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will translate the IP information for clients to access the Internet.

Configuration:

1.Start your browser and type 192.168.1.1 as the address to access ADSL web-based manager.

2.Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI and VPI value, e.g.:

VPI – 0 VCI – 38

Click the Next button.

3.On the Configure Internet Connection – Connection Type page, select PPP over ATM (PPPoA) then click the Next button.

4.On the WAN IP Settings page, select Obtain an IP address automatically and check Enable NAT box. Click Next.

5.On the PPP Username and Password page, enter the PPP username and password that you got from your ISP. Select Always on or select Dial on Demand and key in the inactivity timeout value. (The default value is 20 minutes.) Then click Next.

6.On the Configure LAN side Settings page, key in the IP address and subnet mask for your LAN, e.g.:

Primary IP address: 192.168.1.1

Subnet Mask: 255.255.255.0

Check DHCP Server on box. And key in the start and end IP address, e.g.: Start IP Address:192.168.1.2

End IP Address: 192.168.1.254

Then enter the leased time ( the default is 1 day), and click Next.

7.Check the network information on This Internet Connection – Summary page. Make sure the settings match the information provided by your ISP. Click Finish.

52

Page 65
Image 65
Dynalink RTA1025W PPP over ATM PPPoA Mode, Description, Configuration, Primary IP address Subnet Mask, End IP Address