R5505 19
Changing the Aspect Ratio Mode
To change the aspect ratio mode, select GENERAL, and then
select TV DISPLAY. For widescreen (16:9) monitors, select
WIDE. For standard monitors and letterbox viewing (black
bars on the top and bottom of the screen, but the entire image
preserved), select NORMAL/LB. For standard 4:3 monitors
and a full-screen image, but with the edges variably cropped
to fit (“pan-and-scan” mode), select NORMAL/PS.
TV DISPLAY
OP MODE
ANGLE MARK
OSD LANG
MAIN PAGE
NORMAL/LB
WIDE
- - GENERAL PAGE - -
NORMAL/PS
CAPTIONS
SCR SAVER
Changing the Video Output Mode
To change the video output mode, select PREFERENCES,
and then select TV TYPE. The default is MULTI. If you experi-
ence problems playing a PAL disc on your NTSC monitors,
select NTSC. If you are using European-spec PAL monitors
exclusively, select PAL.
DISC MENU
SUBTITLE
LOCALE
PARENTAL
- - PREFERENCES PAGE - -
TV TYPE
NTSC
PAL
MULTI
AUDIO
SUBTITLE
Note:
•The default “MULTI” will automatically output NTSC video from
NTSC discs, and PAL video from PAL discs. Many video monitors
can automatically handle either type of video signal. NTSC is the
North American standard, and the only type of disc many North
American users will encounter.