Rosen Entertainment Systems R5505 Troubleshooting, Specifications, Tinny sound or low-level sound

TROUBLESHOOTING

“Tinny” sound or low-level sound.

Check the Volume setting.

Check the “Downmix” setting in the SETUP menus and ensure that it is set to “Stereo,” not “LT/RT.”

No sound

Check the Mute function on the remote control.

Is the Analog audio output turned off? Check the Setup Menu under Audio, Audio Out. Using the Digital output defeats the Analog audio output.

Picture distorts, “rolls”, appears black and white.

Check that the TV Type setting is correct for the monitors being used. PAL video often “rolls” on NTSC monitors.

With a widescreen 16:9 monitor, I have black bars on the top and bottom of my screen.

Change the TV Display mode to “Wide.”

SPECIFICATIONS

Supply voltage: 12V DC Nominal, 11-16V operating voltage*

Temperature: 0o to 50o Celsius*

Current consumption: Less than 2A

Video:

Television System: NTSC/PAL

Aspect ratio: 4:3, 16:9

TV encoder resolution: 10-bit DA converter

Video Signal level: 1V peak-to-peak

Discs played:

DVD video discs—

5“(12 cm) single-sided, single and double-layer 3“(8 cm) single-sided, single and double-layer

Compact discs (CD-DA, VIDEO-CD, CD-R)— 5“(12 cm) disc

3“(8 cm) disc

Audio output level: 2V RMS @1kHz

Audio signal output characteristics:

Frequency response:	48khz sampling : 4Hz~22khz
	96khz sampling : 4Hz~44khz

*Note: Use of the R5505 or R5506 beyond the safe operating ranges listed can cause temporary or permanent damage to the unit, and such damage may not covered by the manufacturer’s warranty.

R5505 25