Installation and Wiring

1. Before Starting

Read these instructions and the following precautions carefully.

WARNING!

Be sure to disconnect the battery (-) terminal before starting. This is to prevent short circuits during installation.

Precautions

This unit is exclusively for cars with a negative ground, 12V power supply.

Do not open the case. There are no user-serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Rosen service center.

Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzene, alcohol, or other solvent. For tough dirt, apply a small amount of cold or warm water to a soft cloth and gently wipe.

2. Package Contents

Disc player unit

IR Remote control

4-pin Power Supply harness

RCA Audio Cable

Additional IR Receiver (with cable)

Installation Brackets and Assorted Hardware

Owner’s Manual / Installation Guide

Warranty Card

3. Installation Requirements

1Use the enclosed screws for installation. Using other screws can cause damage and void the warranty.

ChassisChassis

Damage

14R5505

Page 14
Image 14
Rosen Entertainment Systems R5505 Installation and Wiring Before Starting, Package Contents, Installation Requirements