Dynalink RTA1025W user manual Numbered IP over ATM IPoA, Primary IP Address

Models: RTA1025W

1 159
Download 159 pages 46.24 Kb
Page 69
Image 69

ADSL Router User Manual

Numbered IP over ATM (IPoA)

Default Private IP

192.168.1.110.11.80.83

ISP

STM-1

Loop

 

10.11.80.81

(Internet Service Provider)

 

 

 

10.11.95.233

S/W

 

BRAS

DSLAM

ADSL

Hub

AAA

Router

 

 

 

 

 

 

 

 

RDAIUS

 

 

 

10.11.80.82

 

 

 

PC(S)

Server

 

 

 

 

 

 

 

*BRAS: Broadband

 

IP over ATM

 

 

 

 

 

 

Remote Access Server

Public IP Pre-assigned

 

 

 

 

 

by ISP

 

 

Description:

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is for subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN.

The following example uses the LAN IP address ranging from 10.11.80.81 to

10.11.80.86and the subnet mask for LAN is 255.255.255.248. The WAN IP address is 10.11.95.233, and the subnet mask for WAN is 255.255.255.248.

Configuration:

1.Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.

2.Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI and VPI value, e.g.:

VPI – 0 VCI – 32

Click the Next button.

3.On the Configure Internet Connection – Connection Type page, select IP over ATM (IPoA) then click Next.

4.On the WAN IP Settings page, select Use the following IP address and Use the following DNS Server Address, then key in the information that your ISP offered, e.g.:

WAN IP Address: 10.11.95.233

WAN Subnet Mask: 255.255.255.248

Primary DNS server: 168.95.1.1

Secondary DNS server: 168.95.192.1 Uncheck Enable NAT and click Next.

5.On the Configure LAN side Settings page, key in the information for your LAN, e.g.,

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

6.Check Configure the second IP Address and Subnet Mask for LAN Interface and enter the information needed.

Secondary IP Address: 10.11.80.81

56

Page 69
Image 69
Dynalink RTA1025W user manual Numbered IP over ATM IPoA, Primary IP Address