Daewoo SH-9840P Initial Installation, Setting up the player, Switch the TV on, Basic Operation

Initial Installation

■Switch the TV on.

■You can also start "AUTO SET" in the SETUP "PR PRESET" ➝ "AUTO SET".

■To tune in new stations (manual tuning) and to enter station names see page 24-25.

Setting up the player

1	You should see this picture the first time you switch on the TV
	and player.

AUTO SET

OK:CONFIRM SETUP:END

2	OK for "AUTO SET!".
	country."AUTO SET" tunes in all the stations you can receive in your
	Clock is automatically set.
3	If other stations are positioned on near the current RF OUTPUT
	CH, the guide message appears automatically.
	The player recommends the optimal RF OUTPUT CH number
	automatically.
4	Press the [OK] button to confirm the recommended PR.
	Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme locations" on page 25.

Otherwise ...

exit the basic installation function and enjoy your player.

CH 25

PLEASE WAIT...

	SETUP:END
RF OUTPUT SET
CURRENT	CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM	SETUP:END

IMPORTANT!

PLEASE CHANGE THE TV

CH TO 54.

MANUAL SET

PR01 P-O1	PR08 P-08
PR02 P-02	PR09 P-09
PR03 P-03	PR10 P-10
PR04 P-04	PR11 P-11
PR05 P-05	PR12 ----
PR06 P-06	PR13 ----
PR07 P-07	PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

Basic Operation

•If you don´t see this picture, because you don´t use a SCART cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).

•In case of interference problems on CH 52, type in an other transmission channel between 21 and 69 using the number buttons.

17