Daewoo SH-9840P To Copy From DVD To Videotape, One Touch timer Recording OTR, Basic Operation

Models: SH-9810P SH-9840P SH-3510P

1 66
Download 66 pages 59.08 Kb
Page 25
Image 25
Recording

Recording

To Copy From DVD To Videotape

1 Insert the desired DVD disc.

When the DVD disc is copyright protected, you can’t copy it. If DVD disc is not copy protected then insert a blank tape.

2 Press [REC] button during playing of DVD.

DVD plays and VCR starts recording.

3 If you press STOP [To Copy From DVD To Videotape] button in DVD mode, DVD and VCR will stop at the same time.

If you press STOP [One Touch timer Recording (OTR)] button in VCR mode, VCR stops to record and DVD continues to play.

“This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.”

Basic Operation

One Touch timer Recording (OTR)

If you need to make an instant recording, or you want to record the current TV programme for a pre- determined time , follow the procedures below.

1

2

First, follow the steps 1 to 4 in “Recording With VCR”.

Press [REC] button reference the “Recording Times Table” below.

Once

continuous recording until you press STOP button

Twice

recording for 30 mins from current time

3 (times)

recording for 1 hour

Incrementing recording for 30 mins at each press.

21recording for 10 hours

22returning to the status of Once Press

3 To stop Recording mode, press [STOP] button more than 5 seconds.

23

Page 25
Image 25
Daewoo SH-9840P, SH-3510P, SH-9810P To Copy From DVD To Videotape, One Touch timer Recording OTR, Basic Operation