Daewoo SH-9810P, SH-3510P, SH-9840P instruction manual Normal timer recording, Timer Recording

Timer Recording

■For timer recordings, clock, date, and stations must be set correctly.

■Load a cassette with its safety tab in place and with sufficient free space for the recording.

Normal timer recording

	Call up the player’s "SETUP" menu and, choose "TIMER
1	PROGRAM".
	Decide if you want to record "ONCE", "WEEKLY" or
	"DAILY"...
	... and confirm.
	Type in one after the other:
2	• The programme location number;
	• the time the broadcast starts,
	• the time the broadcast ends,
	• the day of the broadcast, if it is not today.
	• Select LP if you wish to make a long play recording .
	• Switch off VPS/PDC here if you need to .
	If you wish to make changes:
3	Move to the position you want to change using the [œ/√ ]
	buttons.buttons. Change the setting using the [PR+/- ] or [number]

If all settings are ok, press [œ or √], till you see “OK : CONFIRM” in the bottom line.

Confirm.

HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM?

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

PR+/-:SELECT
OK:CONFIRM	SETUP:END
TIMER PROGRAM (ONCE)
PR	--
START TIME	--:--
END TIME	--:--
START DATE	--/--
TAPE SPEED	SP
VPS/PDC	ON
PR+/-:SELECT(AV1/AV2)
0-9 :SETUP(PR)
➝/➝ :CORRECT	SETUP:END
TIMER PROGRAM (ONCE)
PR	01
START TIME	18:10
END TIME	20:30
START DATE	20/08(FRI)
TAPE SPEED	LP
VPS/PDC	ON
PR+/-:SELECT(AV1/AV2)
0-9 : SETUP (PR)
➝/➝ :CORRECT	SETUP:END
OK:CONFIRM

VCR Operation

Switch your player off.

•Wait a few seconds after typing a one-digit-number.

•If you have made a mistake, move to the position you want to change using the [œ/√] buttons and change the setting.

•If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the machine will record the first programme completely then continue with the second one.

•If there is no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity.

•The recorder will eject cassettes which have the safety tab removed.

•The player will be powered on and record the program at the set time.

•If the player is powered on after a timer recording has been set, the player cannot record in VCR mode but can record in DVD mode.

27