Mabe Canada JCBS250 manual Care, Cleaning Troubleshooting Tips Consumer Support, To Set the Clock

Models: JCBP270 JCBS640 JCBS250 JCBP240 JCBP250 JCBP630 JCBS280 JCBP620 JCBS630

1 40
Download 40 pages 62.13 Kb
Page 15
Image 15

Usingtheclock,timerandconvenienceoutlet.(on some models) GEAppliances.ca

Not all features are on all models.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

Touch the CLOCK pad twice.

Touch the + or pads.

If the + or pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original setting.

If this happens, touch the CLOCK pad and reenter the time of day.

Touch the START/ON pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Instructions Operating Instructions

To Turn Off the Clock Display

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range.

Touch the CLOCK pad once to turn off the time of day display. Although you will not be able to see it, the clock maintains the correct time of day.

Touch the CLOCKpad again to recall the clock display.

Care and

The timer is a minute timer only.

The OFF pad does not affect the timer.

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the TIMER pad.

Touch the + or pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than

59 minutes should be changed to hours and minutes.

If you make a mistake, touch the TIMER pad and begin again.

Touch the START/ON pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the TIMER pad

is touched.

Cleaning Troubleshooting Tips Consumer Support

15

Page 15
Image 15
Mabe Canada JCBS250 Care, Cleaning Troubleshooting Tips Consumer Support, To Set the Clock, To Turn Off the Clock Display