Moxa Technologies G2150I manual Show PDP Address +CGPADDR, +Cgpaddr=?, 10-17

OnCell G2150I AT Command Set GPRS Commands

Show PDP Address: +CGPADDR

Description: The exclusion command returns a lot of PDP addresses for the specified context identifiers. The test command returns a list of defined <cid>s

Command syntax:

Command	Possible responses
+CGPADDR=[<cid> [,<cid> [,…]]]	+CGPADDR: <cid>,<PDP_addr>
	[<CR><LF>+CGPADDR: <cid>,<PDP_addr>
	[...]]
	OK
+CGPADDR=?	+CGPADDR: (list of defined <cid>s)
	OK

Defined values:

<cid>: a numeric parameter that specifies a particular PDP context definition. If no <cid> is specified, the addresses for all defined contexts are returned.

<PDP_address>: a string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic. For a static address, it will be the one set by the +CGDCONT command when the context was defined. For a dynamic address it will be the one assigned during the last PDP context activation that used the context definition referred to by <cid>. <PDP_address> is omitted if none is available.

Example

In this example 3 CIDs are defined.

AT+CGPADDR=1

+CGPADDR=1,”107.210.5.4”

OK AT+CGPADDR=? +CGAPDDR: (1,2,4)

OK AT+CGPADDR +CGPADDR: 1, +CGPADDR: 2, “10.3.73.151” +CGPADDR: 4,

Cellular Result Codes: +CRC

Description: This command enables a more detailed ring indication, in case of an incoming call (voice or data). Instead of the string “RING”, an extended string is used to indicate which type of call is ringing (e.g. +CRING: VOICE).

These extended indications are:

+CRING: ASYNC	for asynchronous transparent
+CRING: REL ASYNC	for asynchronous non-transparent
+CRING: VOICE	for normal speech.
+CRING: FAX	for fax calls
	10-17