Moxa Technologies G2150I manual At+Cgqreq=?, 10-4

OnCell G2150I AT Command Set		GPRS Commands
	AT+CGQREQ=?	+CGQREQ: <PDP_type>, (list of supported
		<precedence>s), (list of supported <delay>s),
		(list of supported <reliability>s) , (list of
		supported <peak>s), (list of supported
		<mean>s)
		[<CR><LF>+CGQREQ: <PDP_type>, (list of
		supported <precedence>s), (list of supported
		<delay>s), (list of supported <reliability>s) ,
		(list of supported <peak>s), (list of supported
		<mean>s)
		[…]]
		OK
	AT +CGQREQ=1,1,4,5,2,14	OK
	AT+CGQREQ=[<cid> [,<precedence >	OK
	[,<delay> [,<reliability.> [,<peak>	ERROR
	[,<mean>]]]]]]
	AT+CGQREQ?	+CGQREQ: <cid>, <precedence >, <delay>,
		<reliability>, <peak>, <mean>
		[<CR><LF>+CGQREQ: <cid>, <precedence
		>, <delay>, <reliability.>, <peak>, <mean>
		[…]]
		OK

Defined values:

<cid>: numeric parameter that specifies a particular PDP context definition. Range of values is 1 to 3

<precedence>: numeric parameter that specifies the precedence class

0:Subscribed precedence (subscribed by the Network by default if value is omitted)

1:High priority (service commitments shall be maintained ahead of precedence class 3.)

3:Low priority (service commitments shall be maintained after precedence classes 1 and

2)

<delay>: numeric parameter which specifies the delay class

0:Subscribed

1:Delay class 1

2:Delay class 2

3:Delay class 3

4:Delay class 4

		Delay (maximum values)
		SDU size: 128 bytes			SDU size: 1024 bytes
		Mean	95 percentile		Mean	95 percentile
		Transfer	Delay (sec)		Transfer	Delay (sec)
Delay Class		Delay (sec)			Delay (sec)
0		Subscribed	Subscribed by the Nwk / default if value is omitted
		< 0.5	< 1.5		< 2	< 7
1.	(Predictive)
2.	(Predictive)	< 5	< 25		< 15	< 75
3.	(Predictive)	< 50	< 250		< 75	< 375
4.	(Best Effort)			Unspecified

10-4