Auxiliary reader, Connecting Diagram, Gemprox-H

Auxiliary reader

GEMPROX-H

125KHz,Wiegand 26~37-bit format output

Size:88(L) X 44(W)X16(D)mm

Connecting Diagram

Fail-Safe Lock

St 2 connect to 1-2

Fail-Secure Lock

St 2 connect to 2-3

Power supply (9~16Vdc)

*Linear supply recommended

Insert 2-3 position to reset

DG-600H Jp1 leads to all Wiegand format

DG-600H Jp1 short-circuit to Wiegand 26 bits format

GIANNI INDUSTRIES, INC.

No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242

TEL: 886-2-2206 9929 FAX: 886-2-2204 6632

E-Mail: info@gianni.com.tw

Website: gianni.tw

DG-600H

Stand-alone Proximity Reader

The auxiliary reader must not be further than 50 meters from the DG-600H. Also this reader should be nearer than 60 centimeters, to avoid disturbance. The suggested wire gauge is #22~26 AWG. Split of units for DG-600H and auxiliary reader in ranging up to 50 M bring out the friendly system device for low cost but high security with anti-tampering as well as convenience and reliability.

Contact door switch or the electric lock signal output

Push Button

External relay start the warning system

Auxiliary Reader

(Wiegand Format)

Connect to 1-2;C and D contact is N.C.

Connect to 2-3; for N.O.

Connect to 1-2;C and A contact is N.C.

Connect to 2-3; for N.O.

	The products are manufactured under an ISO
	9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y
	Management Program environment back its
	product quality, performance and commitment
GP001	to customer satisfaction.

Gianni Industries DG-600H Auxiliary reader, Connecting Diagram, Gemprox-H, Gianni Industries, Inc

Models: DG-600H

Auxiliary reader

GEMPROX-H

Connecting Diagram