Moxa Technologies G2150I Set DSR Signal &S, Back to Online Mode O, Result Code Suppression Q

OnCell G2150I AT Command Set		V24-V25 Commands
	AT&D1	OK
	Note: Modem switches from data to	Note: Command valid
	command mode when DTR switches from
	ON to OFF
	AT&D2	OK
	Note: When DTR switches from ON to OFF,	Note: Command valid
	the call is released

Defined values: <n>

0:The DTR signal is ignored

1:Modem switches from data to command mode when DTR switches from ON to OFF

2:Upon DTR switch from ON to OFF, the call is released

Set DSR Signal: &S

Description: This command controls the Data Set Ready (DSR) signal.

Command syntax: AT&S<n>

Command	Possible responses
AT&S0	OK
Note: DSR always on	Note: Command valid
AT&S1	OK
Note: DSR off in command mode, DSR on in	Note: Command valid
data mode

Defined values: <n>

0:DSR always on

1:DSR off in command mode, DSR on in data mode

Back to Online Mode: O

Description: If a connection has been established and the ME is in command mode, this command allows you to return to online data mode.

Command syntax: ATO

Command		Possible responses
ATO		OK
Note: Return from offline mode to online mode
Defined values:	No parameter

Result Code Suppression: Q

Description: This command determines whether the mobile equipment sends result codes or not

Command syntax: ATQ<n>

Command	Possible responses
ATQ0	OK
Note: DCE transmits result codes	Note: Command valid
ATQ1	Note: No response
Note: Result codes are suppressed and not
transmitted
9-5