Moxa Technologies G2150I manual Un-change SMS Status +WUSS, Was reinitialized

OnCell G2150I AT Command Set		Short Message Commands
	Command	Possible responses
	AT+CPMS?	+CPMS: “SM”,3,10,”SM”,3,10,”SM”,3,10
	Note: Check the storage area	OK
	AT+CMGW=“+33146290800”<CR>	+CMGW: 4
	Hello how are you ?<ctrl-Z>	OK
	Note: Write a message in text mode	Note: Message stored in index 4 in the SIM
	AT+WMGO=?	+WMGO: (1-10) OK
		Note: Possible values for the SIM
	AT+WMGO=4	OK
	AT+CMGW=“+33146290000”<CR>	+CMGW: 4
	You are overwritten<ctrl-Z>	OK
		Note: New Message stored in index 4
	AT+WMGO?	+WMGO: 4
		OK
		Note: The value was used, so re-initialization
	AT+WMGO=4	OK
	AT+CPMS=“SM”,”ME”,”SM”	+CPMS: 3,10,0,99,3,10
		OK
		Note: Change the storage area from SIM to Flash
	AT+WMGO=?	+WMGO: (1-99) OK
		Note: Possible values for the Flash
	AT+WMGO?	+WMGO: 0
		OK
		Note: We changed the storage area, so the value
		was reinitialized
	AT+WMGO=999	+CMS ERROR: 321

Note: if the storage area is changed with the AT+CPMS command, the value of WMGO will be reset to 0.

Defined values: <loc> location number of the SMS to write or overwrite. Number depends on the SIM or Flash memory capacity.

Un-change SMS Status: +WUSS

Description: The +WUSS command allows keeping the SMS Status to UNREAD after +CMGR or +CMGL.

Command syntax:	AT+WUSS=<mode>
Command		Possible responses
AT+WUSS=?		+WUSS: (0-1)
		OK
AT+WUSS=1		OK
		+CMTI: “SM”,10
		Note: SMS has been received in index 10
AT+CMGR=10		+CMGR: “REC
		UNREAD”,”+33660669023”,,”03/02/13,18:36:35+00”<CR><LF>
		Do you want to change state ?
		OK
	7-18