Moxa Technologies G2150I manual Report Mobile Equipment Errors +CMEE, Keypad Control +CKPD

OnCell G2150I AT Command Set General Commands

Report Mobile Equipment Errors: +CMEE

Description: This command disables or enables the use of the “+CME ERROR: <xxx>“ or “+CMS ERROR:<xxx>“ result code instead of simply “ERROR”.

Command syntax: Command syntax: AT+CMEE=<error reporting flag>

Command	Possible responses
AT+CMEE=?	+CMEE: (0,1)
	OK
AT+CMEE=0	OK
Note: Disable ME error reports, use only “ERROR”
AT+CMEE=1	OK
Note: Enable “+CME ERROR: <xxx>“ or “+CMS
ERROR: <xxx>“
AT+CMEE?	+CMEE: 1
	OK

Defined values: <error reporting flag>

0:Disable ME error reports, use only « ERROR »

1:Enable «+CME ERROR: <xxx>» or «+CMS ERROR: <xxx>»

Keypad Control: +CKPD

Description: This command emulates the ME keypad by sending each keystroke as a character in a <keys> string. The supported GSM sequences are listed in the appendix. If emulation fails, a +CME ERROR: <err> is returned. If emulation succeeds, the result depends on the GSM sequence activated: Note: In the case where the FDN phonebook is activated, the sequences concerning “call forwarding” are allowed only if the entire sequence is written in the FDN.

Command syntax: AT+CKPD=<keys>

Command	Possible responses
AT+CKPD=“*#21#”	+CCFC: 0,7
Note: Check every call forwarding status
AT+CKPD=“1234”	+CME ERROR 3
Note: Sequence not allowed

Defined values: <keys> Keyboard sequence: string of the following characters (0-9,*,#).

Clock Management: +CCLK

Description: This command is used to set or get the current date and time of the ME real-time clock.

Command syntax: AT+CCLK=<date and time string>

Command	Possible responses
AT+CCLK=“00/06/09, 17:33:00”	OK
Note: set date to June 9th, 2000, and time to	Note: Date/Time stored
5:33 pm
AT+CCLK=“00/13/13, 12:00:00”	+CME ERROR 3
Note: Incorrect month entered

3-7