Moxa Technologies G2150I manual List Message +CMGL, Alphafield, Memory at index

OnCell G2150I AT Command Set		Short Message Commands
	Command	Possible responses
		AT+CMTI: “SM”,1
		Note: New message received
	AT+CMGR=1	+CMGR: “REC UNREAD”, “0146290800”,
	Note: Read the message	“98/10/01,18:22:11+00”, <CR><LF>
		ABCdefGHI
		OK
	AT+CMGR=1	+CMGR: “REC READ”,”0146290800”,
	Note: Read the message again	“98/10/01,18:22:11+00”, <CR><LF>
		ABCdefGHI
		OK
		Note: Message is read now
	AT+CMGR=2	OK
		Note: location empty
	AT+CMGF=0 ;+CMGR=1	+CMGR: 2,,<length> <CR><LF><pdu>
		OK
	Note: In PDU mode	Note: Message is stored but unsent, no
		<alpha>field
	AT+CMGF=1;+CPMS=“SR”;+CNMI=,,,2	OK
	Note: Reset to text mode, set read memory
	to “SR”, and allow storage of further SMS
	Status Report into “SR” memory
	AT+CMSS=3	+CMSS: 160
	Note: Send an SMS previously stored	OK
		+CDSI: “SR”,1
		Note: New SMS Status Report stored in “SR”
		memory at index 1
	AT+CMGR=1	+CMGR: “REC UNREAD”,6,160,
	Note: Read the SMS Status Report	“+33612345678”, 129, “01/05/31,15:15:09+00”,
		“01/05/31,15:15:09+00”, 0
		OK

List Message: +CMGL

Description: This command allows the application to read stored messages, by indicating the type of the message to read. The messages are read from the memory selected by the +CPMS command.

Command syntax: AT+CMGL=<stat> Response syntax for text mode:

y+CMGL: <index>,<stat>,<da/oa>,[<alpha>], [<scts>, <tooa/toda>, <length>] <CR><LF><data> (for SMS-DELIVER and SMS-SUBMIT, may be followed by other <CR><LF>+CMGL:<index>…) +CMGL: <index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (for SMS-STATUS-REPORT only, may be followed by other <CR><LF>+CMGL:<index>…)

Response syntax for PDU mode:

y+CMGL: <index>,<stat>, [<alpha>], <length> <CR><LF> <pdu> (for SMS-DELIVER, SMS-SUBMIT and SMS-STATUS-REPORT, may be followed by other <CR><LF>+CMGL:<index>…)

7-10