Moxa Technologies G2150I manual Automatic Dialing with DTR AT%Dn, Command syntax AT%Dn

OnCell G2150I AT Command Set Call Control Commands

Automatic Dialing with DTR: AT%Dn

Description: This command enables and disables:

•automatic dialing of the phone number stored in the first location of the ADN phonebook (or FDN phonebook, if it is activated using +CLCK command).

•automatic sending of the short message (SMS) stored in the first location of the SIM. The number is dialed when DTR OFF switches to ON. The short message is sent when DTR OFF switches to ON

Command syntax: AT%D<n>[ ;]

Command	Possible responses
AT%D1;	OK
Note: Activates DTR voice number	Note: Command has been executed
dialing
DTR is OFF	OK
DTR switches ON
Note: The number in the first
location of the
ADN is dialed automatically
DTR switches OFF
Note: The product goes on-hook
AT%D2	OK
Note: Activates DTR short message	Note: Command has been executed
sending
DTR is OFF	+CMSS: x
DTR switches ON
Note: The first short message is
sending
AT%D1;	OK
DTR is OFF	+CME ERROR: 21
DTR switches ON
Note: no phone number in the
first location in the ADN
phonebook (or FDN phonebook
if it’s activated using +CLCK
command)

Command		Possible responses
AT%D2		OK
DTR is OFF		+CMS ERROR: 321
DTR switches ON
Note: no short message in the first
location of the SIM.
Defined values:
<n> (0-2)	To enable or disable automatic message transmission or number dialing. Informs
	the product that the number is a voice number, rather than a fax or data number.
AT%D0	Disables automatic DTR number dialing / message transmission.
AT%D1;	Enables automatic DTR dialing if DTR switches from OFF to ON; Dials the phone
	number in the first location of the ADN phonebook (or FDN phonebook, if it is
		4-6