Moxa Technologies G2150I manual Defined values, 10-20

OnCell G2150I AT Command Set		GPRS Commands
	Command	Possible responses

AT+WGPRS?

Note:

-Automatic re-attachment at init

not activated		+WGPRS: 0,0
-	Automatic reactivation of PDP	+WGPRS: 1,0
context at init not activated
-	3 PDP contexts, and automatic	+WGPRS: 2,1,1
		+WGPRS: 2,0,2
reactivation		+WGPRS: 2,0,3
only for Cid 1		+WGPRS: 2,0,4
-	PPP silent mode activated	+WGPRS: 3,1
-	GPRS class is 8	+WGPRS:4,8
-	GPRS slow connect activated	+WGPRS:5,1
-	PPP filtering activated	+WGPRS:6,1
- Automatic re-attachment and PDP		+WGPRS:7,1
reactivation at operator border areas
		OK

Defined values:

<mode>: a numeric parameter that specifies a G2150I GPRS parameter.

0ATTACH-STATUS (the ME don’t make automatically a GPRS attachment after init)

1PDP-INIT-STATUS (declare some PDP contexts liable to be activated automatically after initialization by <mode>=2)

2Set ACTIVABLE automatically after init a define PDP context

3PPP silent mode

4.Definition of the GPRS multislot class.

5Slow CONNECT for PALM® OS

6PPP Filtering

7Automatic GPRS roaming inter-operator: if activated, ME automatically re- attaches itself to the network and reactivates its PDP context by changing operator when reaching border areas.

Notes:

If <mode>=0, 1, 3, 4, 5, 6or 7 <cid> and <class> values will be ignored. If <mode>=0, 1, 2, 3, 5 or 6, <class> value will be ignored.

If <mode>=4, <parameter> and <cid> values will be ignored. G2150I must be restarted to take the modification into account.

PPP Filtering is a test-purpose functionality. It avoids sending on the radio link

10-20