Moxa Technologies G2150I Send Message From Storage +CMSS, Set Text Mode Parameters +CSMP, Format

OnCell G2150I AT Command Set Short Message Commands

mode (default “STO UNSENT” for +CMGW). Indicates the status of message in memory. If <stat> is omitted, the stored message is considered as a message to send.

0“REC UNREAD”

1“REC READ”

2“STO UNSENT”

3“STO SENT”

<length> Length of the actual data unit in bytes

Send Message From Storage: +CMSS

Description: This command sends a message stored at location value <index>.

Command syntax: AT+CMSS=<index>[,<da> [,<toda>] ]

Response syntax: +CMSS: <mr> or +CMS ERROR: <err> if sending fails

If a new recipient address <da> is given, it will be used instead of the one stored with the message

Command	Possible responses
AT+CMGW=0660123456<CR>	+CMGW: 5
Today is my birthday	OK
	Note: Message stored with index 5
AT+CMSS=5, 0680654321	+CMSS:<mr>
Note: Send the message 5 to a different	OK
	Note: Successful transmission
destination number

Set Text Mode Parameters: +CSMP

Description: This command is used to select a value for <vp>, <pid>, and <dcs>.

Command syntax: AT+CSMP=<fo>, <vp>, <pid>,<dcs>

Command	Possible responses
AT+CSMP?	+CSMP: 0,0,0,0
Note: current values	OK
	Note: No validity period
	<dcs>= PCCP437 alphabet (8 bits ¼ 7 bits)
AT+CSMP=17,23,64,244	OK
Note:<vp> = 23 (2 hours, relative	Note: Command correct
format)
<dcs> = GSM 8 bits alphabet
Remind to enter <fo> value in decimal
notation.

Defined values:

The <fo> byte comprises 6 different fields:

b7	b6	B5	b4	b3	b2	b1	b0
RP	UDHI	SRR	VPF		RD	MTI

Note: <fo> must be entered in DECIMAL format. Hexadecimal format would lead to irrelevant result.

RP: Reply Path, not used in text mode.

UDHI: User Data Header Information, b6=1 if the beginning of the User Data field contains a Header in addition to the short message. This option is not supported in +CSMP command,

7-13