Management
Menu Location
Select the location of the OSD on the screen.
Projection Mode
Front
The default setting.
Rear
The projector reverses the image so you can project from behind a translucent screen.
Front
The projector turns the image upside down for
The projector simultaneously reverses and turns the image upside down. You can project from behind a translucent screen with a
Signal Type
Manually select signal type RGB, YCbCr, YPbPr.
Lamp Hour
Displays operating hours since lamp timer reset.
Lamp Reset
Use this function only after a new lamp is installed in the projector. Select the left Lamp Reset icon (light bulb and arrow under the icon), and press the Enter button to reset the lamp timer.