Dell 2200MP specifications Power Saving, Set TimeMin, Auto Source, ECO Mode, High Altitude

Power Saving

Use this function to select the power saving delay period. Press "Yes" to go into the "set time" sub menu.

Set Time(Min)

Set the power saving delay period as you prefer. When the projector is not receiving an input signal for the selected period of time, the projector will automatically enter power saving mode, and turn off the lamp. After a one-minute cooling period, the projector will turn back on with detection of an input signal or by pressing the "Power" button. After two hours the projector will turn off and must be turned on by pressing the power button on the control panel or remote.

Auto Source

The projector will always automatically search for available input signals when Auto Source is On, which is the default setting. Press the "Source" button with Auto Source On to automatically search for the next available input signal. Selecting Off will lock on the current input source. Set Auto-Sourceto Off to step through the different input signals manually.

ECO Mode

Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. Selecting "On" will dim the projector lamp; selecting "Off" will return the lamp to high brightness mode.

High Altitude