Panasonic SV-PT1PP operating instructions PC Mode Operation with the PC, File Operations

PC Mode (Operation with the PC)

When this unit is connected to a PC using the USB Cable provided (p. 42), it will be recognized as a Removable Disk. You can then copy, move, delete, and display files on this unit the same as with a normal disk drive.

SD Lamp Liquid Crystal

HDD Lamp Display

MENU

CANCEL

/SET

SET

File Operations

1

2

Make connections following “Setup (Connections)” steps on page 42.

Select and change to another card.

•With a USB cable connected, selecting another card will terminate communication with the PC. Do Steps 1~4 of “Disconnecting Unit from PC” on page 45, then proceed with the following operation.

Press to select “SD” or “HDD (PC Card)”, then press SET.

•While the SD or HDD lamp is flashing, “CANNOT

CHANGE SLOT” is displayed and operation is not

possible. After the lamp goes out, press SET again. (Liquid Crystal Display)

3 Double-click [My Computer], then double-click [Removable Disk].

•Files contained on the card will be displayed and normal PC operations can be done.

•If no removable disk is found, refer to

“Reinstalling the Device Driver” on page 48.

–Note –

•Drive letters (e.g. “H:”) and method of opening My Computer may vary depending on the PC.

•With USB cable connected, the “Removable Disk” icon will not appear while the SD or HDD Lamp flashes as the PC checks the connection. Check for the icon once the indicator goes out. It may take several minutes for the PC to recognize the PC Card HDD device.

44