Panasonic SV-PT1PP PC Mode Liquid Crystal Display, TV Mode TV Screen Display

Warning and Instruction Displays

PC Mode (Liquid Crystal Display)

Indications	Condition
CONNECT AC	Connect the AC adaptor.
	Selection cannot be changed between a PC Card
CANNOT	HDD/PC Card and an SD Memory Card during
CHANGE SLOT	data transfer between the unit and a PC. Wait for
	transfer to finish, then make your selection.
INSERT BATT.	Insert the battery.
DISCONNECT USB	Data transmission was interrupted. Disconnect the
	USB cable. Check that the battery and AC adaptor
PULL OUT USB CABLE	are connected correctly, then reconnect the USB
	cable.
MODE CHANGE	The mode is being changed. Please wait a moment.
PLEASE WAIT
POWER OFF	After processing is finished, the power will turn off.
PLEASE WAIT
SAFETY MODE	The HDD SAFETY Detection Switch has activated
	and the HDD has stopped for protection. Place the
PUT IT DOWN
	unit on a flat, level surface.

TV Mode (TV Screen Display)

Indications	Condition
NO CARD	Insert a card.
NO DATA	There is no data on the card or in the folder.
	An error has occurred during HDD/PC Card
	initialization. Turn power off, then reinsert the
INITIALIZE ERROR	card. If error is repeated, format the card (p. 23)
	and reinsert it. If error persists, card may be
	damaged.
FORMAT ERROR	An error occurred during formatting of the card. Re-
	insert the card and then reformat it. (pp. 22, 23)
NO IMAGE FILE	There are no JPEG or TIFF files in the folder that
	can be displayed.
	Insufficient free space on the copy destination disk.
NO CAPACITY	Delete unnecessary files, or insert a card with
	sufficient free space.
COPIED EXCEPT	Secure data files (audio files that include copyright
SECURE FILES	restrictions) cannot be copied.
	(Continued on next page.)

For Your Information

51