Panasonic SV-PT1PP operating instructions Reset Function

Warning and Instruction Displays

TV Mode (TV Screen Display)

Indications	Condition
COPY ERROR	The specified operation did not execute correctly.
DELETE ERROR	Reset the unit (see below), or turn power off, then
PROTECT ERROR	back on and repeat the operation.
CAN’T READ
SETTING FILE
CAN’T DISPLAY	An image file could not be displayed. The file is
	corrupt or the format is incompatible.
FOR HDD SAFETY	The HDD SAFETY Detection Switch has activated
	and the HDD has stopped for protection. Place the
PUT UNIT DOWN
	unit on a flat, level surface.
THIS FILE ISN’T EXIF	Rotated images cannot be saved.
CAN’T SAVE THIS FILE
NO SUPPORT	SD Memory Cards that have been formatted to
FAT32 SD CARD	FAT32 specifications cannot be used.
CANNOT SELECT	Folders cannot be selected for Slide Show. Open a
	folder, then select files.
BATTERY LOW	The battery is spent. Operation will be canceled and
	power will turn off. Recharge the battery.
COPY CANCEL	The battery is spent. Copy operation will stop and
BATTERY LOW	power will turn off. Recharge the battery.
	The operation timed out due to no selection during a
NOT SELECTED	Slide Show, presentation, copying, deleting or file
	protecting operation. Repeat the selection.
BATTERY LOW	Battery level is getting low. Turn off the power and
PLEASE POWER OFF	recharge the battery.
DELETE EXCEPT	Protected files and files that cannot be displayed
PROTECT AND CAN’T
	cannot be deleted.
VIEW FILE
CARD IS WRITE	Card or file is protected. To continue the operation,
PROTECTED	remove the protection.

Reset Function

If an error occurs during an operation and the unit no longer works, reset the unit as follows.

Press CANCEL and STANDBY simultaneously for 5 seconds.

• Unit is reset. Try operation again.

CANCEL

STANDBY

52