Sanyo LNS-W10 instruction manual Initial Programming, Language, Handset name, Dial mode

INITIAL PROGRAMMING

Before using this telephone, the following initial settings must be completed: volume level, ring volume, ring tone, auto answer, key tone, key lock, handset name, language, phone book, call log, message waiting, and dial mode. The last 4 settings are stored on the base unit and control all handsets. The other settings must be set for each handset individually.

Language

1.Press MENU/OK to enter the options menu.

2.Scroll or until you see “LANGUAGE.”

3.Press MENU/OK to enter settings.

4.Press or to select the desired language (English, Spanish, or French). The default is English.

5.Press MENU/OK to confirm.

Handset name

You can use up to 16 characters to name a handset, the name will appear on the handset display screen in standby mode. To name your handset:

1.Press the MENU/OK key.

2.Press or to select “HANDSET NAME”.

3.Press MENU/OK to begin settings, “NAME” will appear.

4.Enter a name for your handset.

Note: refer to Storing a name / number in the directory	section for details
about how to input characters on page 18.
5. Press MENU/OK to save the name.
Dial mode

This phone is compatible with pulse-dialing (rotary) and tone-dialing (DTMF) systems. If you have a touch-tone service, do nothing as your phone has been set to touch- tone by default prior to shipment. If you do not know which type of service you have, contact your local telephone company. The default setting is DTMF.

1.Press the MENU/OK key.

2.Press or to select “DIALING” from the options.

3.Press the MENU/OK key.

4.Press or to select “DIAL METHOD” from the submenu.

5.Press MENU/OK.

6.Press or to select “PULSE” or “DTMF” mode.

7.Press MENU/OK to confirm your selection.

8. To return to standby mode, press C repeatedly.

11